Quality management
Electrical and Instrumentation QA/QC Inspection
Learn the work of an electrical and instrumentation QC inspector on site: ITPs, test records, loop checks, NCRs and handover.
Electrical and Instrumentation QA/QC Inspection is a free, self-paced online course from EDWartens for electrical and instrumentation graduates, site technicians and site engineers moving into QA/QC on EPC, power, oil and gas, water and industrial projects in the Gulf and worldwide. It has 13 modules and takes about 13.2 hours, with written notes, a practice task per module, a practical project and a final assessment of 15 questions (pass mark 60%). Learning costs nothing and needs only a free account. The optional EDWartens Certificate of Completion, verifiable by code, is a one-off US$23.99 for you; it is not a vendor credential. Updated 1 November 2026.
- Free
- Beginner
- 13.2 hours
- Self-paced
- Certificate optional
- Lab practice in your browser
No card, no trial. The course is free for good. Certificate US$23.99, optional.
- Who it is for
- Electrical and instrumentation graduates, site technicians and site engineers moving into QA/QC on EPC, power, oil and gas, water and industrial projects in the Gulf and worldwide
- Jobs
- Roles that use this skill: quality engineer, process improvement analyst, quality auditor and operations manager. No course guarantees a job.
- Tools
- A spreadsheet (LibreOffice Calc is free) for the ITP, the test records, the NCR log and the punch list. Nothing else is needed. Hardware: none. If you can borrow an insulation tester and a multimeter at work, the practice tasks are better for it, but every task can be done on paper.
- Updated


After this course you can
By the end you will be able to:
- Write ITP lines with hold, witness, review and surveillance points
- Inspect cable laying, glands, terminations and earthing
- Witness insulation resistance and continuity tests and judge the records
- Check a loop folder and witness loop checks from the QC side
- Write NCRs that get closed and compile a punch list
Who it is for, and what you need first
Who it is for
Electrical and instrumentation graduates, site technicians and site engineers moving into QA/QC on EPC, power, oil and gas, water and industrial projects in the Gulf and worldwide.
Level: Beginner. Beginner to intermediate. For electrical and instrumentation diploma and degree graduates, site technicians and site engineers moving into QA/QC. You should know what a cable, a breaker and a 4-20 mA transmitter are; no inspection experience is needed.
What you need
Software: A spreadsheet (LibreOffice Calc is free) for the ITP, the test records, the NCR log and the punch list. Nothing else is needed..
Hardware: None. If you can borrow an insulation tester and a multimeter at work, the practice tasks are better for it, but every task can be done on paper.. What to download, and how.
How this course works
Watch the lessons
Short video lessons, one module at a time, at your own pace.
Read the notes
Open the Reading tab for the written notes and diagrams of the module.
Practise in the 3D labOptional
Try the module in the free 3D lab, in your browser.
Check yourself
Answer the questions to see what stuck before you move on.
Final assessment
Pass the final once you have been through the modules.
Certificate, if you want oneOptional
Optional, with a page anyone can use to verify it.
What you learn
13 modules in order, at your own pace. 13.2 hours of video lessons, with written notes and a practice task in each module.
- 1The E&I QA/QC inspector on an EPC site27m
- 2ITPs, inspection points, method statements and inspection requests14m
- 3Material receiving inspection39m
- 4Cable containment and cable laying31m
- 5Cable glanding and termination inspection30m
- 6Insulation resistance and continuity test records1h 5m
- 7Earthing and bonding inspection1h 46m
- 8Electrical equipment installation: switchgear, transformers and motors48m
Show the other 5 modules
- 9Instrument installation and hook-up inspection12m
- 10Loop checks and ITRs from the QC side, with lab practice: 30m
- 11Nonconformance reports and corrective action8m
- 12Document control, punch lists and the handover dossier20m
- 13Final Assessment
Software you need
What to download, where from, what it costs and how to install it. Every link goes to the maker's own site, never a mirror.
Nothing to install
A spreadsheet is enough for the ITP, the test records, the NCR log, the punch list and the dossier index.
Show what to download (1 tool)
Optional
Useful, not needed to finish the course.
- 01Free
LibreOffice
The Document Foundation
- Runs on
- Windows 10 or 11, macOS 11 or newer (Intel or Apple silicon), Linux
- Account
- None needed
- Size
- up to 1.5 GB of disk space on Windows
LibreOffice is free, open-source software under the Mozilla Public License 2.0, for any use including business. Calc is its spreadsheet.
Steps
- 1.Open the LibreOffice download page.
- 2.Check the page has picked your operating system, then select Download.
- 3.Run the installer (administrator rights are needed on Windows).
- 4.Start LibreOffice Calc for spreadsheet work.
- 5.Save as .xlsx if you need to share files with Excel users.
- Choose the latest main version unless your organisation asks for the older, more conservative release.
Official download pagelibreoffice.org
Checked against each maker's own page on 27 September 2026. Trial lengths and editions change; the maker's page is the final word.
Practise in the 3D lab
Do a loop check yourself in the Process lab, so you know what a good loop check record looks like before you sign one as an inspector.
- Loop checkProcess lab, about 35 minOpen in the lab (opens in a new tab): Loop check
Optional. Skip it whenever you like: it never blocks your progress or your certificate.
Course project, about 10 hours
QC pack for an LV switchboard subsystem: ITP, cable test record, NCR, punch list and handover dossier index
Act as the contractor's E&I QC inspector for one subsystem, an LV switchboard feeding six pump motors at a water treatment plant. Write the ITP, review the cable test record, raise and close an NCR, run the punch list and score the handover dossier. The sample pack shows each document filled in.
- 5documents in the pack
- 10steps to follow
- 5things to hand in
- 10 hof work, at your pace
- RegisterInspection and test plan: subsystem 21-SB-01, LV switchboard and pump feeders
- Test reportCable test record: 21-SB-01 power cables
- ReportNonconformance report NCR-EI-007: indoor glands on outdoor motor entries
- Punch listPunch list: subsystem 21-SB-01 walkdown
- RegisterHandover dossier index: subsystem 21-SB-01
The project is optional practice. The certificate needs only the modules and the final assessment.
After the course, your next step
Show what you can do, then keep going in the same field.
A certificate you can verify
Finish the modules and pass the final assessment (15 questions, pass mark 60%) and you can add a certificate with a public verification page. One-off, US$23.99 for you. It is not a vendor credential.
Want a free certificate? Do the matching Free internship: 4 weeks, nothing to buy, with a free certificate of completion.

Project work you can show
Weekly briefs and a work record, online. Pick the internship that fits you. Finish weeks 1 to 4 and the final, then claim a free Internship Completion Certificate with your real dates and study hours, and a QR code anyone can scan to verify it. Training, not employment.
Find an internshipMore free courses
Roles that use this skill
- Quality engineer
- Process improvement analyst
- Quality auditor
- Operations manager
These are the kinds of roles where the skill is used. We make no promise of a job or an interview.
Plain notes
- Free: the whole course, the notes, the practice tasks, the final assessment and support from practising engineers.
- Paid, and optional: the course certificate, and the Engineer-verified internship (the Free internship costs nothing).
- No job promise: the course teaches a skill. It does not place you in a job.
- Lessons by: QualityEngineers Guide, Engineering Management Institute, Quality Control with Frans, Sofeast, IIQA, eFIXX, ELEK Software, Rashid iqubal, GSH Electrical, CMP Products, LEARN ELECTRICS, Polycab India Limited, Tom Sandri, John Ward (jwflame), Master Electricians New Zealand, OMICRONenergy, SparkyNinja, Eaton, Gaurav J - TheElectricalGuy, The Electrical Guy, eFunda Engineers, Instrumentation ABC, Swagelok, Engineering Design & Management, Oil & Gas - Completions Coordinator, CommissioningCoach.com. Independent creators; the lessons stream from their own channels. EDWartens wrote the study plan, notes, practice tasks and assessments.
QualityEngineers Guide · Engineering Management Institute · Quality Control with Frans · Sofeast · IIQA · eFIXX · ELEK Software · Rashid iqubal · GSH Electrical · CMP Products · LEARN ELECTRICS · Polycab India Limited · Tom Sandri · John Ward (jwflame) · Master Electricians New Zealand · OMICRONenergy · SparkyNinja · Eaton · Gaurav J - TheElectricalGuy · The Electrical Guy · Instrumentation ABC · Swagelok · Engineering Design & Management · Oil & Gas - Completions Coordinator · CommissioningCoach.com. If you are one of these creators and want a lesson removed or credited differently, write to info@edwartens.com.
Practise what you learn in the free 3D lab
Technical work is judged on what you can do: wiring, commissioning, finding a fault. Doing a task yourself teaches more than watching it a second time, and a lab lets you try it safely before you meet real equipment. It does not replace working on real hardware.
- Practise safely, so a mistake costs nothing.
- The lab checks your work like a site test, so you know when it is right.
- Free, in your browser, with nothing to install.
Why learn with EDWartens
What you get with this course, and what comes after it.
- Free from the first lesson to the final assessment.
- Practice in a free 3D lab in your browser, with nothing to install.
- Video lessons with written notes and a project.
- An optional certificate that anyone can verify online.
- Free internships to keep practising afterwards.
Common questions
Who is this E&I QA/QC inspection course for?
It is for electrical and instrumentation diploma and degree graduates, site technicians and site engineers. They want to move into QA/QC on EPC, power, oil and gas, water and industrial projects. You should know what a cable, a breaker and a 4-20 mA transmitter are. No inspection experience is needed.
Is the course free to learn?
Yes. Every module, the notes, the worked problems, the project and the final assessment are free. The only software you need is a free spreadsheet. The certificate is optional.
Which standards does it use?
It names standards by family and teaches their structure in its own words. IEC 60364-6 covers verification tests, with BS 7671 and NFPA 70 as regional equivalents. IEC 60079-14 and 60079-17 cover hazardous-area equipment. IEC 62382 covers loop checks. IEEE 43 and IEEE 81 cover motor insulation and earth testing. ISO 9001, ISO 10005 and ISO/IEC 17020 cover the quality system. Your project specification always governs.
Does it help me get approved as an inspector on Saudi Aramco, ADNOC or QatarEnergy projects?
It covers the knowledge those approval interviews and tests ask about. That includes the SATIP, SAIC and SATR documents on Saudi Aramco work. Approval itself is granted only by the owner. The owner reviews your experience and gives an interview or test. No course grants it, this one included.
What certificate does the Electrical and Instrumentation QA/QC Inspection course give?
An EDWartens certificate of completion, issued when you finish the modules and pass the 15-question final at 60 percent. It has a number anyone can verify on our site. It is not an owner's inspector approval. It is not a third-party inspection certification or a CSWIP, AWS or ISA credential.
Does it teach me to do the tests myself?
It teaches what a correct test looks like, so you can witness it and judge its record. Testing live or high-voltage equipment needs training, authorisation and a competent person under your local regulations. The course does not replace them.
How long does the Electrical and Instrumentation QA/QC Inspection course take?
About 13 hours of video, notes and practice at your own pace. About 7.5 hours of that is video. The optional project takes about 10 hours more.
What is the project in the Electrical and Instrumentation QA/QC Inspection course?
You act as the contractor's E&I QC inspector. The job is an LV switchboard feeding six pump motors at a water treatment plant near Porto, Portugal. You produce the ITP and a reviewed cable test record. You also write an NCR from statement to closure, the walkdown punch list and the scored handover dossier.
Do I have to use the lab?
No. The lab is optional practice. You can skip it whenever you like, and it never blocks your progress, the final assessment or your certificate.
Is the lab free?
Yes. Every lab level for this course opens in your browser, free, with nothing to install.
What topics does the Electrical and Instrumentation QA/QC Inspection course cover, module by module?
The Electrical and Instrumentation QA/QC Inspection course has 13 modules. It opens with "The E&I QA/QC inspector on an EPC site", goes through "ITPs, inspection points, method statements and inspection requests", "Cable glanding and termination inspection", "Instrument installation and hook-up inspection" and "Document control, punch lists and the handover dossier" and ends with "Final Assessment". The full list with minutes is under "What you learn" on this page.
What can I do after the Electrical and Instrumentation QA/QC Inspection course?
After the Electrical and Instrumentation QA/QC Inspection course: Explain who inspects whose work on an EPC project and what the E&I inspector may and may not decide; Write ITP lines with clauses, measurable criteria and hold, witness, review and surveillance points; Inspect E&I material on receipt and decide accept, hold or reject on a material inspection report. These are the practical outcomes the course is written around, and the final assessment of 15 questions checks them.
What software and hardware do I need for the Electrical and Instrumentation QA/QC Inspection course, and does it cost anything?
For the Electrical and Instrumentation QA/QC Inspection course, software: A spreadsheet (LibreOffice Calc is free) for the ITP, the test records, the NCR log and the punch list. Nothing else is needed. Hardware: none. If you can borrow an insulation tester and a multimeter at work, the practice tasks are better for it, but every task can be done on paper. The course itself is free.
Is the Electrical and Instrumentation QA/QC Inspection course suitable for me, and what level is it?
Electrical and Instrumentation QA/QC Inspection is rated beginner. Beginner to intermediate. For electrical and instrumentation diploma and degree graduates, site technicians and site engineers moving into QA/QC. You should know what a cable, a breaker and a 4-20 mA transmitter are; no inspection experience is needed. It is written for electrical and instrumentation graduates, site technicians and site engineers moving into QA/QC on EPC, power, oil and gas, water and industrial projects in the Gulf and worldwide, and takes about 13.2 hours at your own pace.
Which jobs use the skills from the Electrical and Instrumentation QA/QC Inspection course?
Skills from the Electrical and Instrumentation QA/QC Inspection course (for example: explain who inspects whose work on an EPC project and what the E&I inspector may and may not decide) are used in roles such as quality engineer, process improvement analyst, quality auditor and operations manager, and in QA/QC inspector work. The course gives you practical evidence of the skill; it does not promise a job, and employers decide on experience and interview.
Start free today
Electrical and Instrumentation QA/QC Inspection, at your own pace. Add the certificate only if you want one.