Renewable energy
Rooftop Solar PV Design and Installation
Design, install and test a rooftop solar system, from reading your electricity bill and surveying the roof to commissioning it.
Rooftop Solar PV Design and Installation is a free, self-paced online course from EDWartens for electrical graduates, diploma holders, electricians and installers moving into rooftop solar worldwide. It has 14 modules and takes about 17 hours, with written notes, a practice task per module, a practical project and a final assessment of 15 questions (pass mark 60%). Learning costs nothing and needs only a free account. The optional EDWartens Certificate of Completion, verifiable by code, is a one-off US$23.99 for you; it is not a vendor credential. Updated 1 November 2026.
- Free
- Beginner
- 17 hours
- Self-paced
- Certificate optional
- Lab practice in your browser
No card, no trial. The course is free for good. Certificate US$23.99, optional.
- Who it is for
- Electrical graduates, diploma holders, electricians and installers moving into rooftop solar worldwide
- Jobs
- Roles that use this skill: energy engineer, power systems engineer, solar or EV technician and site engineer. No course guarantees a job.
- Tools
- Free tools only: PVGIS (web), SolarEdge Designer (web, free account), SAM, the System Advisor Model (free download, free account), Google Earth and a spreadsheet. Hardware: none. A tape measure, a compass app and access to a roof you can reach safely make the survey task more real.
- Updated


After this course you can
By the end you will be able to:
- Size an on-grid array from a year of electricity bills
- Survey a roof and find shade
- Size strings against inverter voltage and MPPT limits
- Size DC and AC cables and specify protection devices
- Test and commission a system to IEC 62446-1
Who it is for, and what you need first
Who it is for
Electrical graduates, diploma holders, electricians and installers moving into rooftop solar worldwide.
Level: Beginner. Beginner. For electrical and electronics graduates and diploma holders, electricians moving into solar, and installers who want the design behind the work. You should know volts, amps and watts; no solar experience is needed.
What you need
Software: Free tools only: PVGIS (web), SolarEdge Designer (web, free account), SAM, the System Advisor Model (free download, free account), Google Earth and a spreadsheet..
Hardware: None. A tape measure, a compass app and access to a roof you can reach safely make the survey task more real.. What to download, and how.
How this course works
Watch the lessons
Short video lessons, one module at a time, at your own pace.
Read the notes
Open the Reading tab for the written notes and diagrams of the module.
Practise in the 3D labOptional
Try the module in the free 3D lab, in your browser.
Check yourself
Answer the questions to see what stuck before you move on.
Final assessment
Pass the final once you have been through the modules.
Certificate, if you want oneOptional
Optional, with a page anyone can use to verify it.
What you learn
14 modules in order, at your own pace. 17 hours of video lessons, with written notes and a practice task in each module.
- 1The sun, irradiance and peak sun hours38m
- 2Panels and inverters, and reading their datasheets59m
- 3Load and consumption analysis from an electricity bill, with lab practice: 35m
- 4Site survey, shading and roof structure51m
- 5Array layout and string sizing, with lab practice: 1h 0m
- 6DC and AC cable sizing and voltage drop, with lab practice: 36m
- 7Protection: DC fuses, isolators, SPDs, RCDs and MCBs, with lab practice: 33m
- 8Earthing and lightning protection for rooftop PV59m
Show the other 6 modules
- 9Batteries and hybrid system sizing56m
- 10Net metering and the approval process41m
- 11Mounting, installation sequence and safety at height37m
- 12Testing and commissioning, with lab practice: 1h 17m
- 13Operation, monitoring, yield and payback1h 21m
- 14Final Assessment
Software you need
What to download, where from, what it costs and how to install it. Every link goes to the maker's own site, never a mirror.
PVGIS is used from module 1; SolarEdge Designer helps with the layout in module 5; SAM is optional for the payback work in module 13. Every calculation can also be done by hand or in a spreadsheet.
Show what to download (5 tools)
Required
- 01Free
PVGIS (Photovoltaic Geographical Information System)
European Commission Joint Research Centre, in the browser
- Runs on
- Any modern web browser
- Account
- None needed
PVGIS is a free online tool from the European Commission's Joint Research Centre. It covers Europe, Africa, most of Asia including India and the Gulf, and the Americas, from satellite data. No account is needed.
Steps
- 1.Open the PVGIS tools page.
- 2.Click your site on the map, or enter its latitude and longitude.
- 3.Choose the grid-connected tool and enter the kWp, tilt and azimuth.
- 4.Read the monthly energy and irradiation table, and download the report or the CSV.
- 5.Use the TMY tab to download hourly temperature data for string sizing.
- PVGIS azimuth is measured from south: 0° is south, east is negative and west is positive.
Open PVGIS (Photovoltaic Geographical Information System)re.jrc.ec.europa.eu
Optional
Useful, not needed to finish the course.
- 02Free
SolarEdge Designer
SolarEdge, in the browser
- Runs on
- Any modern web browser
- Account
- A free SolarEdge account
SolarEdge Designer is a free web tool for laying out modules on a roof, checking strings and estimating energy. It is built around SolarEdge products; the layout and shading work applies to any system.
Steps
- 1.Open designer.solaredge.com and sign up for a free account.
- 2.Create a residential project and find the site on the map.
- 3.Draw the roof faces, obstacles and setbacks.
- 4.Place the modules and run the string and energy checks.
- 5.Export the layout for your design file.
Open SolarEdge Designerdesigner.solaredge.com - 03Free
SAM (System Advisor Model)
National Laboratory of the Rockies (formerly NREL)
- Runs on
- Windows, macOS or Linux
- Account
- A free registration on the SAM website
SAM is a free desktop application for the performance and financial modelling of energy projects, from the US National Laboratory of the Rockies (formerly the National Renewable Energy Laboratory). Its source code is open on GitHub.
Steps
- 1.Open the SAM website and register for a free account.
- 2.Download the installer for your system.
- 3.Install and open SAM, then start a new photovoltaic project with a residential financial model.
- 4.Load weather data for your site and enter the system design.
- 5.Run the simulation and read the energy and payback results.
Official download pagesam.nlr.gov - 04Free
Google Earth Pro on desktop
Google
- Runs on
- Windows, macOS or Linux
- Account
- None needed
Google Earth Pro on desktop is free. Google has announced it will no longer be available for new downloads from 25 June 2027; copies installed before then keep working, and Google points users to Google Earth on the web.
Steps
- 1.Open the Google Earth versions page.
- 2.Select Download Earth Pro on desktop.
- 3.Accept the terms and download the installer for your system.
- 4.Run the installer and start Google Earth Pro.
- 5.Use the ruler, placemark and historical imagery tools the course asks for.
- Install it before 25 June 2027 if you want the desktop version.
- Google Earth on the web now has many of the same tools and needs no installation.
Official download pagegoogle.comAlternatives
- Google Earth on the web: Free in a browser; Google's recommended replacement for the desktop app.
- 05Free
LibreOffice
The Document Foundation
- Runs on
- Windows 10 or 11, macOS 11 or newer (Intel or Apple silicon), Linux
- Account
- None needed
- Size
- up to 1.5 GB of disk space on Windows
LibreOffice is free, open-source software under the Mozilla Public License 2.0, for any use including business. Calc is its spreadsheet.
Steps
- 1.Open the LibreOffice download page.
- 2.Check the page has picked your operating system, then select Download.
- 3.Run the installer (administrator rights are needed on Windows).
- 4.Start LibreOffice Calc for spreadsheet work.
- 5.Save as .xlsx if you need to share files with Excel users.
- Choose the latest main version unless your organisation asks for the older, more conservative release.
Official download pagelibreoffice.org
Checked against each maker's own page on 27 September 2026. Trial lengths and editions change; the maker's page is the final word.
Practise in the 3D lab
Size an array against a load, choose strings, cables and fuses, and energise the system in the safe order, as a rooftop job does.
- Generation against load: size the array for self-consumptionSolar and EV labOpen in the lab (opens in a new tab): Generation against load: size the array for self-consumption
- String sizing for the coldest and hottest daySolar and EV labOpen in the lab (opens in a new tab): String sizing for the coldest and hottest day
- Select cables, fuses, isolators and surge protectorsSolar and EV labOpen in the lab (opens in a new tab): Select cables, fuses, isolators and surge protectors
- Commission the system: the safe energising orderSolar and EV labOpen in the lab (opens in a new tab): Commission the system: the safe energising order
Optional. Skip it whenever you like: it never blocks your progress or your certificate.
Course project, about 10 hours
Designing a 5 kW on-grid rooftop system for a home from its electricity bill
Design a 5 kW on-grid rooftop solar system for a family home from a year of electricity bills. Size the array, lay it out on the roof and size the strings, cables and protection. Draw the single-line diagram, list the materials, estimate the yield and write the commissioning checklist.
- 5documents in the pack
- 8steps to follow
- Laboptional: in the 3D lab
- 7things to hand in
- 10 hof work, at your pace
- ReportDesign basis and yield: 5.45 kWp rooftop system
- Single lineSingle-line diagram: 5.45 kWp on-grid system
- Cable scheduleCable schedule: 5.45 kWp system
- BOMBill of materials: 5.45 kWp system
- Commissioning procedureCommissioning checklist and record
Do it in the lab: 4 steps.
The project is optional practice. The certificate needs only the modules and the final assessment.
After the course, your next step
Show what you can do, then keep going in the same field.
A certificate you can verify
Finish the modules and pass the final assessment (15 questions, pass mark 60%) and you can add a certificate with a public verification page. One-off, US$23.99 for you. It is not a vendor credential.
Want a free certificate? Do the matching Free internship: 4 weeks, nothing to buy, with a free certificate of completion.

Electrical and Solar Energy
Eight short weeks of electrical basics, rooftop solar PV, batteries and EV charging, from site survey to testing and handover: notes, diagrams, a few videos and worked exercises. Finish weeks 1 to 4 and the final, then claim a free Internship Completion Certificate with your real dates and study hours, and a QR code anyone can scan to verify it. Training, not employment.
See the internshipMore free courses
Roles that use this skill
- Energy engineer
- Power systems engineer
- Solar or EV technician
- Site engineer
These are the kinds of roles where the skill is used. We make no promise of a job or an interview.
Plain notes
- Free: the whole course, the notes, the practice tasks, the final assessment and support from practising engineers.
- Paid, and optional: the course certificate, and the Engineer-verified internship (the Free internship costs nothing).
- No job promise: the course teaches a skill. It does not place you in a job.
- Lessons by: ISA Academy - International Solar Alliance, Design of photovoltaic systems (NPTEL, IISc), SolarEdge, Mayfield Renewables, Seaward USA, Ministry of New and Renewable Energy. Independent creators; the lessons stream from their own channels. EDWartens wrote the study plan, notes, practice tasks and assessments.
ISA Academy - International Solar Alliance · Design of photovoltaic systems (NPTEL, Prof. L. Umanand, IISc Bangalore) · SolarEdge (SolarEdgePV) · Mayfield Renewables · Seaward USA · chriskitcher (Chris Kitcher) · Ministry of New and Renewable Energy (mnreindia) · SepiSolar · EnergyUME · UNICEF Solar Hub · ReneSola Global · The Solar Energy Channel by Paradise Energy · DIY Solar Power with Will Prowse · HeatSpring · Sterling Solar Works · Cleversolarpower by Nick · IECCalc · Greenwood Solutions · Solar Power World · DEHN International · Mohamad Nassereddine · Photovoltaics Explained · SolarReviews · Unbound Solar · SafeWork NSW · Prof. Dr. Henrik te Heesen · Midwest Renewable Energy Association (MREA). If you are one of these creators and want a lesson removed or credited differently, write to info@edwartens.com.
Practise what you learn in the free 3D lab
Technical work is judged on what you can do: wiring, commissioning, finding a fault. Doing a task yourself teaches more than watching it a second time, and a lab lets you try it safely before you meet real equipment. It does not replace working on real hardware.
- Practise safely, so a mistake costs nothing.
- The lab checks your work like a site test, so you know when it is right.
- Free, in your browser, with nothing to install.
Why learn with EDWartens
What you get with this course, and what comes after it.
- Free from the first lesson to the final assessment.
- Practice in a free 3D lab in your browser, with nothing to install.
- Video lessons with written notes and a project.
- An optional certificate that anyone can verify online.
- Free internships to keep practising afterwards.
Common questions
Who is this rooftop solar course for?
Electrical and electronics graduates and diploma holders, electricians moving into solar, and installers who want the design behind the work, wherever rooftop solar is being installed. You should know volts, amps and watts; no solar experience is needed.
Is the Rooftop Solar PV Design and Installation course really free?
Yes. Every module, the notes, the worked problems, the project and the final assessment are free. The only paid item is the certificate, if you want it.
What software do I need?
Only free tools: PVGIS in the browser, SolarEdge Designer with a free account, SAM (the System Advisor Model) as a free download, Google Earth and a spreadsheet. Every calculation can also be done by hand.
Does it cover PM Surya Ghar and net metering?
Yes. It explains net metering, net billing and gross metering, and walks through the general utility approval route, from application to inspection and the net meter, with India's PM Surya Ghar scheme as one worked example. It states no subsidy amounts; the portal gives the current figures.
Which standards does it follow?
It works to IEC practice: IEC 62548 for array design, IEC 62446-1 for testing and commissioning, IEC 62305 for lightning protection and IEC 60364 for the AC side, with national codes such as India's IS 3043 and IS 875 shown as worked examples. Standards are paraphrased, never copied.
What certificate does the Rooftop Solar PV Design and Installation course give?
An EDWartens Certificate of Completion, issued when you finish the modules and pass the final assessment, with a number anyone can verify on our site. It is not an electrician's or installer's licence, or a Skill Council for Green Jobs qualification; electrical work must be done or supervised by people licensed under the rules where you work.
How long does the Rooftop Solar PV Design and Installation course take?
About 11 hours of video, or about 17 hours with the notes, worked problems and practice tasks, at your own pace. The optional project takes about 10 hours more.
How is this different from the PVsyst course, and what job does it lead to?
This course is rooftop systems from 3 to 100 kW with free tools; PVsyst Solar Power Plant Design goes on to utility-scale simulation. It prepares you for roles such as solar design engineer, rooftop installer or supervisor, and commissioning technician.
Do I have to use the lab?
No. The lab is optional practice. You can skip it whenever you like, and it never blocks your progress, the final assessment or your certificate.
Is the lab free?
Yes. Every lab level for this course opens in your browser, free, with nothing to install.
What topics does the Rooftop Solar PV Design and Installation course cover, module by module?
The Rooftop Solar PV Design and Installation course has 14 modules. It opens with "The sun, irradiance and peak sun hours", goes through "Panels and inverters, and reading their datasheets", "DC and AC cable sizing and voltage drop", "Batteries and hybrid system sizing" and "Operation, monitoring, yield and payback" and ends with "Final Assessment". The full list with minutes is under "What you learn" on this page.
What can I do after the Rooftop Solar PV Design and Installation course?
After the Rooftop Solar PV Design and Installation course: Turn PVGIS irradiation into peak sun hours and an energy estimate; Read module and inverter datasheets and correct them for temperature; Size an on-grid array from a year of electricity bills. These are the practical outcomes the course is written around, and the final assessment of 15 questions checks them.
What software and hardware do I need for the Rooftop Solar PV Design and Installation course, and does it cost anything?
For the Rooftop Solar PV Design and Installation course, software: Free tools only: PVGIS (web), SolarEdge Designer (web, free account), SAM, the System Advisor Model (free download, free account), Google Earth and a spreadsheet. Hardware: none. A tape measure, a compass app and access to a roof you can reach safely make the survey task more real. The course itself is free.
Is the Rooftop Solar PV Design and Installation course suitable for me, and what level is it?
Rooftop Solar PV Design and Installation is rated beginner. Beginner. For electrical and electronics graduates and diploma holders, electricians moving into solar, and installers who want the design behind the work. You should know volts, amps and watts; no solar experience is needed. It is written for electrical graduates, diploma holders, electricians and installers moving into rooftop solar worldwide, and takes about 17 hours at your own pace.
Which jobs use the skills from the Rooftop Solar PV Design and Installation course?
Skills from the Rooftop Solar PV Design and Installation course (for example: turn PVGIS irradiation into peak sun hours and an energy estimate) are used in roles such as energy engineer, power systems engineer, solar or EV technician and site engineer, and in solar PV design engineer work. The course gives you practical evidence of the skill; it does not promise a job, and employers decide on experience and interview.
Start free today
Rooftop Solar PV Design and Installation, at your own pace. Add the certificate only if you want one.