Quality management
Welding Inspection and Mechanical QA/QC with NDT Basics
Learn what a welding QA/QC inspector checks: welding processes, WPS and welder records, defects, visual inspection and NDT basics.
Welding Inspection and Mechanical QA/QC with NDT Basics is a free, self-paced online course from EDWartens for mechanical graduates and diploma holders, welders and fitters moving into QC inspection, and QA/QC engineers new to welding, on fabrication, piping, pressure equipment and oil and gas projects in the Gulf and worldwide. It has 15 modules and takes about 20.5 hours, with written notes, a practice task per module, a practical project and a final assessment of 15 questions (pass mark 60%). Learning costs nothing and needs only a free account. The optional EDWartens Certificate of Completion, verifiable by code, is a one-off US$23.99 for you; it is not a vendor credential. Updated 1 November 2026.
- Free
- Beginner
- 20.5 hours
- Self-paced
- Certificate optional
No card, no trial. The course is free for good. Certificate US$23.99, optional.
- Who it is for
- Mechanical graduates and diploma holders, welders and fitters moving into QC inspection, and QA/QC engineers new to welding, on fabrication, piping, pressure equipment and oil and gas projects in the Gulf and worldwide
- Jobs
- Roles that use this skill: quality engineer, process improvement analyst, quality auditor and operations manager. No course guarantees a job.
- Tools
- None. A spreadsheet (LibreOffice Calc is free) helps with the weld log and the heat input, carbon equivalent and test pressure calculations. Hardware: none. A welding gauge, a steel rule and a torch make the visual inspection practice more real if you have them, but every task can be done from the measurements and drawings in the notes.
- Updated


After this course you can
By the end you will be able to:
- Read an inspection and test plan and welding symbols
- Check a WPS against its PQR and a welder's qualification
- Name weld imperfections, their causes and how to prevent them
- Carry out visual inspection with gauges
- Explain what PT, MT, RT and UT each find and miss
Who it is for, and what you need first
Who it is for
Mechanical graduates and diploma holders, welders and fitters moving into QC inspection, and QA/QC engineers new to welding, on fabrication, piping, pressure equipment and oil and gas projects in the Gulf and worldwide.
Level: Beginner. Beginner to intermediate. For mechanical engineering graduates and diploma holders, welders and fitters moving into inspection, and QA/QC engineers new to welding. No inspection experience is needed; school physics and arithmetic are enough.
What you need
Software: None. A spreadsheet (LibreOffice Calc is free) helps with the weld log and the heat input, carbon equivalent and test pressure calculations..
Hardware: None. A welding gauge, a steel rule and a torch make the visual inspection practice more real if you have them, but every task can be done from the measurements and drawings in the notes.. What to download, and how.
How this course works
Watch the lessons
Short video lessons, one module at a time, at your own pace.
Read the notes
Open the Reading tab for the written notes and diagrams of the module.
Check yourself
Answer the questions to see what stuck before you move on.
Final assessment
Pass the final once you have been through the modules.
Certificate, if you want oneOptional
Optional, with a page anyone can use to verify it.
What you learn
15 modules in order, at your own pace. 20.5 hours of video lessons, with written notes and a practice task in each module.
- 1The QA/QC inspector's job: codes, specifications and the ITP21m
- 2Welding processes I: the arc, SMAW and GTAW52m
- 3Welding processes II: GMAW, FCAW, SAW and consumables45m
- 4Joints, weld terms and welding symbols (AWS A2.4 and ISO 2553)27m
- 5Welding metallurgy for inspectors: carbon equivalent, preheat, cracking and PWHT37m
- 6WPS, PQR and welder qualification1h 1m
- 7Weld imperfections: types, causes, prevention and repair25m
- 8Visual inspection before, during and after welding, with gauges19m
Show the other 7 modules
- 9Destructive testing: tensile, bend, impact, hardness and macro8m
- 10NDT I: penetrant testing and magnetic particle testing48m
- 11NDT II: radiography and ultrasonic testing42m
- 12Materials, certificates and traceability35m
- 13Pressure testing: hydrostatic and pneumatic tests and test packs31m
- 14Reports, NCRs, the final dossier and preparing for CSWIP 3.1 and CWI17m
- 15Final Assessment
Software you need
What to download, where from, what it costs and how to install it. Every link goes to the maker's own site, never a mirror.
Nothing to install
A spreadsheet is enough for the weld log and the heat input, carbon equivalent and test pressure calculations, and any document editor for the ITP, the reports and the NCR.
Show what to download (1 tool)
Optional
Useful, not needed to finish the course.
- 01Free
LibreOffice
The Document Foundation
- Runs on
- Windows 10 or 11, macOS 11 or newer (Intel or Apple silicon), Linux
- Account
- None needed
- Size
- up to 1.5 GB of disk space on Windows
LibreOffice is free, open-source software under the Mozilla Public License 2.0, for any use including business. Calc is its spreadsheet.
Steps
- 1.Open the LibreOffice download page.
- 2.Check the page has picked your operating system, then select Download.
- 3.Run the installer (administrator rights are needed on Windows).
- 4.Start LibreOffice Calc for spreadsheet work.
- 5.Save as .xlsx if you need to share files with Excel users.
- Choose the latest main version unless your organisation asks for the older, more conservative release.
Official download pagelibreoffice.org
Checked against each maker's own page on 27 September 2026. Trial lengths and editions change; the maker's page is the final word.
What you practise
Course project, about 10 hours
QC inspection of a process pipe spool package: ITP, welder and material review, weld log, visual report, NCR and hydrotest
Act as the fabricator's QC inspector on a package of carbon steel process pipe spools built to ASME B31.3. Write the inspection and test plan. Check the WPS and welder qualifications. Review the material certificates. Inspect and report welds with gauges. Keep the weld log and select the radiography sample. Raise and close an NCR. Calculate and release the hydrostatic test.
- 5documents in the pack
- 7steps to follow
- 7things to hand in
- 10 hof work, at your pace
- PlanInspection and test plan: line 1203 pipe spools
- RegisterWeld log extract and radiography selection: line 1203
- Test reportVisual inspection report: spool 1203-SP-06 after PWHT
- ReportNonconformance report NCR-007: undercut on 1203-SP-06-W3 after PWHT
- Test reportHydrostatic test report and pre-test release: test pack TP-1203-01
The project is optional practice. The certificate needs only the modules and the final assessment.
After the course, your next step
Show what you can do, then keep going in the same field.
A certificate you can verify
Finish the modules and pass the final assessment (15 questions, pass mark 60%) and you can add a certificate with a public verification page. One-off, US$23.99 for you. It is not a vendor credential.
Want a free certificate? Do the matching Free internship: 4 weeks, nothing to buy, with a free certificate of completion.

Project work you can show
Weekly briefs and a work record, online. Pick the internship that fits you. Finish weeks 1 to 4 and the final, then claim a free Internship Completion Certificate with your real dates and study hours, and a QR code anyone can scan to verify it. Training, not employment.
Find an internshipMore free courses
Roles that use this skill
- Quality engineer
- Process improvement analyst
- Quality auditor
- Operations manager
These are the kinds of roles where the skill is used. We make no promise of a job or an interview.
Plain notes
- Free: the whole course, the notes, the practice tasks, the final assessment and support from practising engineers.
- Paid, and optional: the course certificate, and the Engineer-verified internship (the Free internship costs nothing).
- No job promise: the course teaches a skill. It does not place you in a job.
- Lessons by: HardHat Engineer, Magnaflux, Anmol Birring, Weld.com, Weld Tech UTeM, NPTEL-NOC IITM, TimWelds, QC Explorers, Hardhat Learning, GAL Gage, CWB Group, Tempilstik, Carbon Arc, College of Western Idaho Welding, Edison Tech Center, WorldWelders, Garry Pace, Material Welding, NDT & QC, LearnToWeld, I4I Academy, QualityEngineers Guide, Welding inspection & NDT, Welding /NDT Inspection. Independent creators; the lessons stream from their own channels. EDWartens wrote the study plan, notes, practice tasks and assessments.
HardHat Engineer · Magnaflux · Anmol Birring · Weld.com · TimWelds · Hardhat Learning · GAL Gage · I4I Academy · QualityEngineers Guide · Welding inspection & NDT · Welding /NDT Inspection · Weld Tech UTeM · NPTEL-NOC IITM · QC Explorers · CWB Group · Tempilstik · Carbon Arc · College of Western Idaho Welding · Edison Tech Center · WorldWelders · Garry Pace · Material Welding · NDT & QC · LearnToWeld. If you are one of these creators and want a lesson removed or credited differently, write to info@edwartens.com.
Why learn with EDWartens
What you get with this course, and what comes after it.
- Free from the first lesson to the final assessment.
- Video lessons with written notes and a project.
- An optional certificate that anyone can verify online.
- Free internships to keep practising afterwards.
Common questions
Who is this welding inspection course for?
It is for mechanical engineering graduates and diploma holders, welders and fitters moving into inspection, and QA/QC engineers new to welding. The projects can be fabrication, piping, pressure equipment, structural steel and oil and gas, anywhere. No inspection experience is needed. School physics and arithmetic are enough.
Is the course free to learn?
Yes. Every module, the notes, the worked problems, the project and the final assessment are free. The only software you might use is a free spreadsheet. The certificate is optional.
Does it prepare me for CSWIP 3.1 or AWS CWI?
It covers the knowledge both exams test. Module 14 sets out their formats as published at the time of writing, so you can study for either with a plan. It is not CSWIP 3.1 or AWS CWI and does not award either. TWI Certification awards CSWIP and the American Welding Society awards the CWI. Each does so after its own exams, eyesight test and documented experience. Check cswip.com and aws.org for the current rules before you book.
Will it make me a qualified NDT technician?
No. It teaches how penetrant, magnetic particle, radiographic and ultrasonic testing work, what each finds and misses, and how to read their reports. Carrying out NDT and signing results needs practical training, an examination and certification. That is under ISO 9712 or an employer's scheme to ASNT SNT-TC-1A. Radiography also needs radiation safety authorisation under local law.
Which codes and standards does it use?
It names them by family and teaches their structure in its own words. ISO 15614 and ISO 9606 with ASME Section IX cover procedure and welder qualification. ISO 5817 and ISO 6520 cover imperfections. ISO 2553 with AWS A2.4 covers symbols. EN 10204 covers material certificates. ISO 9712 with ASNT SNT-TC-1A covers NDT personnel. ASME B31.3, AWS D1.1 and API 1104 are the piping, structural and pipeline codes. Acceptance values in the problems are project data. On real work the code and edition in your contract govern.
Does it help with QC inspector jobs in the Gulf?
Employers and clients set their own certification requirements, so check the advert. This course covers the knowledge behind schemes such as CSWIP 3.1, AWS CWI and NDT Level II. It also covers the documents you will handle: the ITP, weld log, NCR and hydrotest pack. Client approval is granted only by the client after its own review and test.
How long does the Welding Inspection and Mechanical QA/QC with NDT Basics course take?
About 20 hours of video, notes and practice at your own pace. About 15 hours of that is video. The optional project takes about 10 hours more.
What certificate does the Welding Inspection and Mechanical QA/QC with NDT Basics course give?
An EDWartens certificate of completion, issued when you finish the modules and pass the 15-question final at 60 percent. It has a number anyone can verify on our site. It is not a CSWIP, AWS CWI, ASNT, PCN or ISO 9712 certificate, or a client approval. EDWartens is not affiliated with TWI, the American Welding Society or ASNT.
What is the project in the Welding Inspection and Mechanical QA/QC with NDT Basics course?
You act as the fabricator's QC inspector on carbon steel process pipe spools built to ASME B31.3 in a shop near Rotterdam. You produce the ITP, the WPS and welder review, and a material certificate check. You also write a visual inspection report, the weld log with its radiography sample, an NCR from statement to closure, and the hydrotest calculation and release. A fully worked pack for one line shows you the standard expected.
What topics does the Welding Inspection and Mechanical QA/QC with NDT Basics course cover, module by module?
The Welding Inspection and Mechanical QA/QC with NDT Basics course has 15 modules. It opens with "The QA/QC inspector's job: codes, specifications and the ITP", goes through "Welding processes I: the arc, SMAW and GTAW", "WPS, PQR and welder qualification", "NDT I: penetrant testing and magnetic particle testing" and "Reports, NCRs, the final dossier and preparing for CSWIP 3.1 and CWI" and ends with "Final Assessment". The full list with minutes is under "What you learn" on this page.
What can I do after the Welding Inspection and Mechanical QA/QC with NDT Basics course?
After the Welding Inspection and Mechanical QA/QC with NDT Basics course: Read an inspection and test plan and say who inspects what, and where work stops at a hold point; Explain how SMAW, GTAW, GMAW, FCAW and SAW work and calculate heat input from the welding parameters; Read welding symbols to ISO 2553 and AWS A2.4, including the arrow side and other side conventions. These are the practical outcomes the course is written around, and the final assessment of 15 questions checks them.
What software and hardware do I need for the Welding Inspection and Mechanical QA/QC with NDT Basics course, and does it cost anything?
For the Welding Inspection and Mechanical QA/QC with NDT Basics course, software: None. A spreadsheet (LibreOffice Calc is free) helps with the weld log and the heat input, carbon equivalent and test pressure calculations. Hardware: none. A welding gauge, a steel rule and a torch make the visual inspection practice more real if you have them, but every task can be done from the measurements and drawings in the notes. The course itself is free.
Is the Welding Inspection and Mechanical QA/QC with NDT Basics course suitable for me, and what level is it?
Welding Inspection and Mechanical QA/QC with NDT Basics is rated beginner. Beginner to intermediate. For mechanical engineering graduates and diploma holders, welders and fitters moving into inspection, and QA/QC engineers new to welding. No inspection experience is needed; school physics and arithmetic are enough. It is written for mechanical graduates and diploma holders, welders and fitters moving into QC inspection, and QA/QC engineers new to welding, on fabrication, piping, pressure equipment and oil and gas projects in the Gulf and worldwide, and takes about 20.5 hours at your own pace.
Which jobs use the skills from the Welding Inspection and Mechanical QA/QC with NDT Basics course?
Skills from the Welding Inspection and Mechanical QA/QC with NDT Basics course (for example: read an inspection and test plan and say who inspects what, and where work stops at a hold point) are used in roles such as quality engineer, process improvement analyst, quality auditor and operations manager, and in welding inspector work. The course gives you practical evidence of the skill; it does not promise a job, and employers decide on experience and interview.
Start free today
Welding Inspection and Mechanical QA/QC with NDT Basics, at your own pace. Add the certificate only if you want one.