Cebu, Philippines 🇵🇭

Free PLC training in Cebu

Engineers and technicians in Cebu can learn PLC programming, SCADA, drives and instrumentation free, online and at their own pace, with the courses below chosen for the city's shipbuilding, ports and logistics, export manufacturing. The optional certificate is US$4.99 (≈ ₱280) for a beginner course.

Why automation skills matter in Cebu

Cebu builds ships at Balamban, runs the country's main domestic port and hosts export manufacturers in the Mactan Economic Zone. Shipyards, port handling and factory lines all depend on control and automation skills.

Shipbuilding

Austal Philippines, Tsuneishi and Metaphil have shipyards at the West Cebu Industrial Park in Balamban.

Ports and logistics

Cebu is the Philippines' main domestic shipping port and home to most of the country's domestic shipping companies.

Export manufacturing

The Mactan Economic Zone in Lapu-Lapu City hosts more than 200 industrial, commercial and retail locators.

Industrial zones in and around Cebu

Mactan Economic Zone (MEPZ 1 and MEPZ 2)
Manufacturing economic zone in Lapu-Lapu City; MEPZ 1 is run by PEZA and MEPZ 2 by the Aboitiz Group.
West Cebu Industrial Park
Industrial park in Balamban hosting the town's major shipyards.

Which PLCs you are likely to meet

Local training-market signal (what providers teach, not a market-share figure): Schneider Electric Philippines offers PLC training on its Modicon M221 and Modicon M580 controllers.

Free courses for Cebu

PLC programming · Beginner · Free

Mitsubishi FX with GX Works2

Industrial networks · Intermediate · Free

Industrial Communication: Serial, Fieldbus, Ethernet, Modbus, PROFINET and OPC UA

Electrical · Beginner · Free

Electrical Control Panel Design, Building and Testing

Drives · Beginner · Free

Variable Frequency Drives: Wiring, Programming, PLC and Network Control

PLC programming · Beginner · Free

Omron PLC with CX-Programmer

PLC programming · Beginner · Free

Siemens TIA Portal

All free courses

The certificate

Beginner US$4.99 (≈ ₱280), a one-off fee. Your bank handles any currency conversion. Issued when you pass the course's final assessment, with a code anyone can verify.

How the certificate works

Useful local bodies

For registration and recognised qualifications in Philippines. EDWartens is not affiliated with them.

Technical Education and Skills Development Authority (TESDA)
National TVET authority; its Mechatronics Servicing NC II qualification covers PLC basics, pneumatics, sensors and actuators.
Professional Regulation Commission (PRC)
Regulates licensed professions, including electronics and electrical engineering.
Institute of Electronics Engineers of the Philippines (IECEP)
PRC-accredited professional organisation for electronics engineers and electronics technicians.

Questions from Cebu

Is there free PLC training in Cebu?

Yes, online. Every EDWartens course is free to learn in full from Cebu: video lessons, notes, practice and a final assessment, in English, at your own pace. They run in the vendors' free or trial software with simulators, so you need a computer, not a PLC.

How much is the certificate?

The certificate is optional. For a beginner course it is US$4.99 (about ₱280), a one-off fee; intermediate and advanced courses cost a little more. Learning stays free whether or not you buy it.

Which PLC should I learn first in Cebu?

Start with Mitsubishi FX with GX Works2. It matches what plants in the region commonly run; the other courses on this page follow Cebu's main industries.

Is the certificate recognised by employers in Cebu?

It is an EDWartens Certificate of Completion with a public verification code, not a vendor, university or government qualification. Employers can check it online; many will also want to see a project you built.

Also in Philippines: Manila

Sources

Local facts checked 26 September 2026. Company and plant names are their owners' and are mentioned for context only.