Electrical
Protection Relays: Settings, Testing and Commissioning
Understand protection relays from CTs to commissioning: set and grade them by hand, then plan injection and stability tests.
Protection Relays: Settings, Testing and Commissioning is a free, self-paced online course from EDWartens for electrical, testing and commissioning engineers and technicians who set and test protection relays. It has 13 modules and takes about 23.5 hours, with written notes, a practice task per module, a practical project and a final assessment of 15 questions (pass mark 60%). Learning costs nothing and needs only a free account. The optional EDWartens Certificate of Completion, verifiable by code, is a one-off US$28.99 for you; it is not a vendor credential. Updated 1 November 2026.
- Free
- Intermediate
- 23.5 hours
- Self-paced
- Certificate optional
- Lab practice in your browser
No card, no trial. The course is free for good. Certificate US$28.99, optional.
- Who it is for
- Electrical, testing and commissioning engineers and technicians who set and test protection relays
- Jobs
- Roles that use this skill: electrical design engineer, panel designer, electrical technician and maintenance engineer. No course guarantees a job.
- Tools
- A spreadsheet (LibreOffice Calc is free) for the grading and test sheets. SEL ACSELERATOR QuickSet to see how settings are entered, and a COMTRADE viewer, are useful but optional. A relay test set is not required: every test is planned and its results worked on paper. Hardware: none required. Access to a numerical relay and a secondary injection test set at work or college makes the testing modules far more useful.
- Updated


After this course you can
By the end you will be able to:
- Check a CT's class and knee point for its duty
- Set and grade overcurrent and earth-fault relays by hand
- Set transformer differential and distance protection
- Read event reports and COMTRADE records
- Plan primary and secondary injection tests and prove trip circuits
Who it is for, and what you need first
Who it is for
Electrical, testing and commissioning engineers and technicians who set and test protection relays.
Level: Intermediate. Intermediate. For electrical engineers, testing and commissioning engineers and technicians, and final-year electrical students. You should know three-phase power, per-unit and basic fault ideas; per-unit and symmetrical components are revised where they are used.
What you need
Software: A spreadsheet (LibreOffice Calc is free) for the grading and test sheets. SEL ACSELERATOR QuickSet to see how settings are entered, and a COMTRADE viewer, are useful but optional. A relay test set is not required: every test is planned and its results worked on paper..
Hardware: None required. Access to a numerical relay and a secondary injection test set at work or college makes the testing modules far more useful.. What to download, and how.
How this course works
Watch the lessons
Short video lessons, one module at a time, at your own pace.
Read the notes
Open the Reading tab for the written notes and diagrams of the module.
Practise in the 3D labOptional
Try the module in the free 3D lab, in your browser.
Check yourself
Answer the questions to see what stuck before you move on.
Final assessment
Pass the final once you have been through the modules.
Certificate, if you want oneOptional
Optional, with a page anyone can use to verify it.
What you learn
13 modules in order, at your own pace. 23.5 hours of video lessons, with written notes and a practice task in each module.
- 1Why protect: faults, zones, selectivity and speed, with lab practice: 40m
- 2CTs and VTs: ratio, class, knee point, polarity and saturation1h 38m
- 3Fuses, MCCB trip units and IDMT curves, with lab practice: 1h 20m
- 4Overcurrent and earth-fault settings and grading by hand, with lab practice: 2h 7m
- 5Transformer differential and restricted earth fault1h 24m
- 6Distance protection for lines: zones and reach1h 42m
- 7Motor and generator protection2h 3m
- 8Numerical relays: settings files, disturbance records and COMTRADE1h 29m
Show the other 5 modules
- 9Primary injection and CT tests: ratio, polarity and magnetising curve1h 3m
- 10Secondary injection: pick-up, timing and characteristic tests1h 30m
- 11Trip-circuit checks, stability tests and commissioning records1h 10m
- 12Relay maintenance, test intervals and faults commonly found1h 8m
- 13Final Assessment
Software you need
What to download, where from, what it costs and how to install it. Every link goes to the maker's own site, never a mirror.
Nothing to install
A spreadsheet is enough for the grading and test sheets. SEL's ACSELERATOR QuickSet (Windows, from selinc.com/products/5030) is useful to see how relay settings are entered, and any COMTRADE viewer opens fault records; neither is required.
Show what to download (1 tool)
Optional
Useful, not needed to finish the course.
- 01Free
LibreOffice
The Document Foundation
- Runs on
- Windows 10 or 11, macOS 11 or newer (Intel or Apple silicon), Linux
- Account
- None needed
- Size
- up to 1.5 GB of disk space on Windows
LibreOffice is free, open-source software under the Mozilla Public License 2.0, for any use including business. Calc is its spreadsheet.
Steps
- 1.Open the LibreOffice download page.
- 2.Check the page has picked your operating system, then select Download.
- 3.Run the installer (administrator rights are needed on Windows).
- 4.Start LibreOffice Calc for spreadsheet work.
- 5.Save as .xlsx if you need to share files with Excel users.
- Choose the latest main version unless your organisation asks for the older, more conservative release.
Official download pagelibreoffice.org
Checked against each maker's own page on 27 September 2026. Trial lengths and editions change; the maker's page is the final word.
Practise in the 3D lab
Work out a fault level and set an IDMT relay so it discriminates with the breaker below it, the heart of overcurrent protection.
- Read the single-line diagramSubstation and MCC labOpen in the lab (opens in a new tab): Read the single-line diagram
- Fault level and breaker checkSubstation and MCC labOpen in the lab (opens in a new tab): Fault level and breaker check
- Grade the incomer relaySubstation and MCC labOpen in the lab (opens in a new tab): Grade the incomer relay
Optional. Skip it whenever you like: it never blocks your progress or your certificate.
Course project, about 11 hours
Overcurrent grading and secondary-injection test plan for a three-level 11 kV and 415 V radial network
Grade the phase overcurrent relays on a three-level 11 kV and 415 V radial network from given fault levels. Write the relay setting sheet and the secondary-injection test plan with expected trip times and tolerances. The sample pack shows each document for a chemical plant's main substation near Johannesburg.
- 5documents in the pack
- 7steps to follow
- Laboptional: in the 3D lab
- 5things to hand in
- 11 hof work, at your pace
- Single lineSingle-line description: process block 11 kV and 415 V supply
- ReportOvercurrent grading study: R3, R2 and R1
- RegisterRelay setting sheet: R1, R2 and R3
- SATSecondary-injection test record: R1, R2 and R3
- Commissioning procedureCommissioning checklist: protection for R1, R2 and R3
Do it in the lab: 4 steps.
The project is optional practice. The certificate needs only the modules and the final assessment.
After the course, your next step
Show what you can do, then keep going in the same field.
A certificate you can verify
Finish the modules and pass the final assessment (15 questions, pass mark 60%) and you can add a certificate with a public verification page. One-off, US$28.99 for you. It is not a vendor credential.
Want a free certificate? Do the matching Free internship: 4 weeks, nothing to buy, with a free certificate of completion.

Electrical and Solar Energy
Eight short weeks of electrical basics, rooftop solar PV, batteries and EV charging, from site survey to testing and handover: notes, diagrams, a few videos and worked exercises. Finish weeks 1 to 4 and the final, then claim a free Internship Completion Certificate with your real dates and study hours, and a QR code anyone can scan to verify it. Training, not employment.
See the internshipMore free courses
Roles that use this skill
- Electrical design engineer
- Panel designer
- Electrical technician
- Maintenance engineer
These are the kinds of roles where the skill is used. We make no promise of a job or an interview.
Plain notes
- Free: the whole course, the notes, the practice tasks, the final assessment and support from practising engineers.
- Paid, and optional: the course certificate, and the Engineer-verified internship (the Free internship costs nothing).
- No job promise: the course teaches a skill. It does not place you in a job.
- Lessons by: Romero Engineering Company, OMICRONenergy, NPTEL IIT Kharagpur, IIT Roorkee July 2018, Hamada Diab, Schweitzer Engineering Laboratories (SEL), Testing Tech Tips, Power Globe, Doble Engineering, Megger, TestGuy, Electrical Passionate, Circuit Masterclass. Independent creators; the lessons stream from their own channels. EDWartens wrote the study plan, notes, practice tasks and assessments.
Romero Engineering Company · OMICRONenergy · NPTEL IIT Kharagpur · IIT Roorkee July 2018 · Hamada Diab · Schweitzer Engineering Laboratories (SEL) · Testing Tech Tips · Power Globe · Doble Engineering · Megger · TestGuy · Electrical Passionate · Circuit Masterclass. If you are one of these creators and want a lesson removed or credited differently, write to info@edwartens.com.
Practise what you learn in the free 3D lab
Technical work is judged on what you can do: wiring, commissioning, finding a fault. Doing a task yourself teaches more than watching it a second time, and a lab lets you try it safely before you meet real equipment. It does not replace working on real hardware.
- Practise safely, so a mistake costs nothing.
- The lab checks your work like a site test, so you know when it is right.
- Free, in your browser, with nothing to install.
Why learn with EDWartens
What you get with this course, and what comes after it.
- Free from the first lesson to the final assessment.
- Practice in a free 3D lab in your browser, with nothing to install.
- Video lessons with written notes and a project.
- An optional certificate that anyone can verify online.
- Free internships to keep practising afterwards.
Common questions
Who is this protection relay course for?
Electrical engineers, testing and commissioning engineers and technicians, utility and plant electrical staff, and final-year electrical students who need to set and test protection relays. It suits people moving into testing and commissioning work.
What do I need to know before starting?
Three-phase power, per-unit quantities and the basic idea of a short circuit. Symmetrical components and per-unit are revised where they are used. No relay or test set experience is needed.
Do I need a relay test set or software?
No. Every setting is calculated by hand or in a free spreadsheet, and every test is planned and its results worked on paper. SEL ACSELERATOR QuickSet and a COMTRADE viewer help you see real settings files and records, and access to a test set at work makes the testing modules more practical.
Which standards does it follow?
The IDMT curves are the IEC 60255 inverse curves and the IEEE C37.112 curves used by numerical relays, records use the COMTRADE format, and maintenance intervals use NERC PRC-005 as a worked example. The course paraphrases these standards; it does not reproduce them, and you should check the edition your plant uses.
How is this different from the ETAP course?
The ETAP Power System Analysis course runs coordination studies in software. This course does the grading by hand and then proves the settings with primary and secondary injection, the way a commissioning engineer works. Taking both is a good combination.
How long does the Protection Relays: Settings, Testing and Commissioning course take?
About 23 hours of video lessons, notes and practice, taken at your own pace; the videos alone are about 17 hours. The optional project takes about 10 hours more.
Is the course free, and what certificate do I get?
Every module, the notes, the project and the final assessment are free. If you pass the 15-question final at 60 percent you can get an EDWartens Certificate of Completion, with a number anyone can verify on our site. It is a certificate of completion, not a licence or a vendor qualification from SEL, OMICRON or any test-set maker.
What jobs does it lead to?
It builds the knowledge used in protection testing and commissioning work with contractors, utilities and EPC firms, in substation maintenance, and in protection settings work for consultancies. Employers will still expect hands-on time with test sets, which this course prepares you to use well.
Do I have to use the lab?
No. The lab is optional practice. You can skip it whenever you like, and it never blocks your progress, the final assessment or your certificate.
Is the lab free?
Yes. Every lab level for this course opens in your browser, free, with nothing to install.
What topics does the Protection Relays: Settings, Testing and Commissioning course cover, module by module?
The Protection Relays: Settings, Testing and Commissioning course has 13 modules. It opens with "Why protect: faults, zones, selectivity and speed", goes through "CTs and VTs: ratio, class, knee point, polarity and saturation", "Transformer differential and restricted earth fault", "Primary injection and CT tests: ratio, polarity and magnetising curve" and "Relay maintenance, test intervals and faults commonly found" and ends with "Final Assessment". The full list with minutes is under "What you learn" on this page.
What can I do after the Protection Relays: Settings, Testing and Commissioning course?
After the Protection Relays: Settings, Testing and Commissioning course: Calculate fault currents from fault levels and draw overlapping zones of protection; Check a protection CT's class and knee point against the voltage its duty needs; Calculate IEC and IEEE inverse-time trip times and read fuse and LSIG trip-unit curves. These are the practical outcomes the course is written around, and the final assessment of 15 questions checks them.
What software and hardware do I need for the Protection Relays: Settings, Testing and Commissioning course, and does it cost anything?
For the Protection Relays: Settings, Testing and Commissioning course, software: A spreadsheet (LibreOffice Calc is free) for the grading and test sheets. SEL ACSELERATOR QuickSet to see how settings are entered, and a COMTRADE viewer, are useful but optional. A relay test set is not required: every test is planned and its results worked on paper. Hardware: none required. Access to a numerical relay and a secondary injection test set at work or college makes the testing modules far more useful. The course itself is free.
Is the Protection Relays: Settings, Testing and Commissioning course suitable for me, and what level is it?
Protection Relays: Settings, Testing and Commissioning is rated intermediate. Intermediate. For electrical engineers, testing and commissioning engineers and technicians, and final-year electrical students. You should know three-phase power, per-unit and basic fault ideas; per-unit and symmetrical components are revised where they are used. It is written for electrical, testing and commissioning engineers and technicians who set and test protection relays, and takes about 23.5 hours at your own pace.
Which jobs use the skills from the Protection Relays: Settings, Testing and Commissioning course?
Skills from the Protection Relays: Settings, Testing and Commissioning course (for example: calculate fault currents from fault levels and draw overlapping zones of protection) are used in roles such as electrical design engineer, panel designer, electrical technician and maintenance engineer, and in protection and commissioning engineer work. The course gives you practical evidence of the skill; it does not promise a job, and employers decide on experience and interview.
Start free today
Protection Relays: Settings, Testing and Commissioning, at your own pace. Add the certificate only if you want one.