Control Panel Design Engineer job simulation, Premium
The whole project, days 1 to 20, at Calderfield Panel Systems Ltd (simulated company). A capstone reviewed by an engineer, an AI viva and the graded certificate, included.
Everything in Free, plus
The same project, taken all the way
- Days 6 to 20The project goes on: a change request, site work, faults and a handover, ticket by ticket.
- A capstone reviewed by an engineerYou hand in a finished deliverable and an engineer reviews it.
- An AI viva on your own workQuestions written from your own hand-ins, answered in text and scored.
- The graded certificateA score and band, a verification page and a QR code. It is included, so you pay for it once.
- A work record PDFYour skill scores and logged hours in one document, with the simulated company named.
- Priority helpQuestions from Premium learners are answered first by our team.
The plan
Days 6 to 20, ticket by ticket
Day 6
about 1 h 20 min- IEC 61439 design verification: the route for each characteristicTable · 1 h 20 min
Day 7
about 1 h 10 min- Approve the alternative contactor?Table · 1 h 10 min
Day 8
about 1 h 40 min- Change impact note: the client's drive replaces the specified oneWriting · 1 h 40 min
Day 9
about 1 h 30 min- Recalculate the heat and the spare area with the client's driveCalculation · 1 h 30 min
Day 10
about 1 h 20 min- Check the revised GA Rev D before releaseDocument review · 1 h 20 min
Day 11
about 1 h 40 min- Wire and commission the drive: mains, motor, safe torque off3D lab · 1 h 40 min
Day 12
about 1 h 30 min- Fault-find a starter that will not run on the test bench3D lab · 1 h 30 min
Day 13
about 1 h 20 min- Routine tests: pass or fail for each circuitTable · 1 h 20 min
Day 14
about 2 h 10 min- Ship on Friday with a failed insulation test?Decision · 40 min
- Write the non-conformance reportWriting · 1 h 30 min
Day 15
about 1 h- Does the heat calculation match the heat run?Calculation · 1 h
Day 16
about 1 h 20 min- Check the routine test certificate before it is signedDocument review · 1 h 20 min
Day 17
about 1 h 10 min- IEC 60204-1 walk-round: does each item comply?Table · 1 h 10 min
Day 18
about 4 h- Capstone: the design packHand-in · 4 h
Day 19
about 1 h- Voltage drop on the site cablesCalculation · 1 h
Day 20
about 45 min- A conversation about your own workViva · 45 min
Real documents
The documents that arrive in Premium
- PNL1042-DVR-001Design verification record, IEC 61439
- PNL1042-ALT-001Request to approve an alternative contactor
- PNL1042-ECR-001Client change: drive VSD-1 replaced after procurement
- PNL1042-GA-001General arrangement, door and mounting plate, drive changed
- PNL1042-FAT-001Routine verification record and heat run, draft
- PNL1042-NCR-001Non-conformance facts from the factory test
- PNL1042-RTC-001Routine test certificate and rating plate data, draft
- PNL1042-CHK-001Machine panel check against IEC 60204-1, facts as built
- PNL1042-HOV-001Design pack handover requirements
Free, certificate or Premium
Compare the three
| What you get | Free | Certificate (optional) | Premium |
|---|---|---|---|
| Length | Days 1 to 5, self-paced | For the free days | Days 1 to 20 |
| What you get |
|
|
|
| Price | Free | ₹499 | ₹1,499 |
No pressure
Start free and upgrade any time
Your free days carry over. Start free today and upgrade when you are ready. What you paid for the certificate is credited against Premium for the same simulation.
Questions
Quick answers
What does the Premium Control Panel Design Engineer job simulation add?
Days 6 to 20: change requests, site work, faults and a handover, then a capstone deliverable reviewed by an engineer and an AI viva on your own work. The graded certificate and a work record PDF are included.
Is the certificate included?
Yes. Premium includes the graded certificate. If you bought the certificate for this simulation first, what you paid is credited when you upgrade, so you do not pay twice.
Can I start free and upgrade later?
Yes. Days 1 to 5 are free, and your answers carry over if you upgrade. Premium days follow on from the free days.
How long does it take?
It is self-paced. A day opens when you hand in the previous day's tickets. All the tickets together are about 33 h 10 min, and your logged hours are the active hours you spend on EDWartens.
Who reviews the capstone?
An engineer reviews your capstone deliverable. The company, client and site in the story are fictional, and the people in the story are roles, not real people.
Does Premium show on my profile as work experience?
It shows on your EDWartens profile under Work experience, marked as a job simulation, with the simulated company named. A job simulation is a realistic training project at a simulated company. It is not employment, an internship or a work placement. Hours are active hours the learner logged on EDWartens.
Control Panel Design Engineer job simulation, Premium
The certificate is included. Practice, not employment.