Browser tool guide
How to set up Panel Lab for free (no install)
A browser lab for control panel wiring practice, used in the panel, commissioning and instrumentation internships.
Last checked 18 Oct 2026.
What it is for
Time
Works on
Official page
Cost and terms
Part of your EDWartens internship. No separate cost and no download.
Checked on the official site on 18 Oct 2026.
What you need
- A computer, tablet or phone with a current browser (Chrome, Edge, Firefox or Safari)
- An internet connection
- Nothing to download
Open it
1.Sign in to your EDWartens account and open My Day, then choose Practice.
You should see: The Panel Lab list of tasks opens.
2.Open the first task.
You should see: A panel appears with parts to place and wires to draw.
3.Place one part and draw one wire to it.
You should see: The wire snaps to the terminal and stays there.
1.Sign in to your EDWartens account and open My Day, then choose Practice.
You should see: The Panel Lab list of tasks opens.
2.Open the first task.
You should see: A panel appears with parts to place and wires to draw.
3.Place one part and draw one wire to it.
You should see: The wire snaps to the terminal and stays there.
1.Sign in to your EDWartens account and open My Day, then choose Practice.
You should see: The Panel Lab list of tasks opens.
2.Open the first task.
You should see: A panel appears with parts to place and wires to draw.
3.Place one part and draw one wire to it.
You should see: The wire snaps to the terminal and stays there.
Check that it works
1.Place a part, wire it, then press Check.
You should see: The check reports what is right and what is missing, in plain words.
If something goes wrong
- I cannot see the Practice page.
- Practice opens once your internship is active. Check My Day for your start date.
- A wire will not connect.
- Drop the end of the wire right on the terminal dot, not beside it.
- The panel looks tiny on my phone.
- Turn the phone sideways, or use a larger screen for wiring.
- Check says something is missing but I cannot find it.
- Read the first line of the message. It names the part or wire. Fix that one and check again.
Leaving it
- There is nothing to remove. Close the tab when you are done.
Which internships use it
- Control Panel Design and Wiring internship, in weeks 1, 2, 3, 4, 5, 6, 7 and 8.
- Commissioning and Maintenance internship, in weeks 1, 2, 3, 4, 5 and 8.
- Instrumentation and Process Control internship, in weeks 4 and 8.
The first 4 weeks of every internship are free. This is training, not employment, and there is no stipend. All software guides.